Вот, что пишут иностранцы о сборке Campmor 3x3:
- I had the 3m dome and from day one I never had a leak. In fact after a big storm the tent was in about 10 cm of water all round like a lake. Not a drop inside. I found that the easiest way to erect it was to lay the tent flat on the ground with the sides still folded towards the middle. I then assembled the spring steel frame add put the legs into the corner eyes. Then stand in the middle and twist the frame so the top is low enough to hold under your arm pit. You then get the centre top of the canvas and attach the top 3 hooks onto each of the 4 frame poles. The frame will then pull up the tent when you release it. It is then easy to attach the rest of the hooks. Taking it down is the reverse. Go round each side and flip it in towards the middle keeping it flat. Fold it to the right width to fit the bag, roll it up tight and then put the bag over the rolled up tent. Do not try to pick up the tent and put it in the bag. Hope this makes sense. Good luck.
- We assemble our tent and I can do this myself if need be, by first pegging the 4 corners, then assembling the bow (poles)
Top Tip:*We were shown initially by a friend who has used his dome for 15 years the easiest is to walk around clipping the S hooks from the bottom going upwards.
I’ve tried all the methods mentioned above and found starting at the bottom is easier, my wife helps and I finish the top last, most often I don’t bother with the last two hooks, you need to stand in the doorway on a box to clip the top S hooks (2.2M high).